Smart Beacons

bfonics smart beacons help you target the best location based contents to mobile solutions

Bfonics Smart Beacons

Our beacons help you target the best location based contents to mobile solutions.
Place bfonics Smart Beacons anywhere to deliver personalized messages to target customers via their mobile devices.

Product Details
iBeacon can work as an independent system, and lithium batteries supply power for these models. It has 3 different working modes, sleep mode, connectable mode and non-connectable mode. It makes the best use of the battery power. For example, it can standby over 5(CR2032) or 16(CR2450) years when work in sleeping mode, much longer than the life of the battery. For developers, we provide the Android and IOS SDK, and all the interface developed completely by us, all of the parameters can be reconfigured, including Proximity UUID, Major, Minor and Power. In order to meet different customers' needs, interval rate can also be configured, which ranges from 100 ms to 10 s. Besides, hardware TX power can be configured, and configurable range is 4 dBm to -40 dBm. Low cost customizing housing would be provided to potential customers.

 

Beacon Hardware Specifications:

Features

  • 3 working modes: Sleeping, Connectable, and Non-connectable. The modes can be switched freely.
  • Built-in Beacon firmware. Compatible with BLE 4.0.
  • Built-in a coin battery (CR2032 or CR2450). Accurate digital RSSI. Excellent link budget (up to 97 dB).
  • High performance and low power, an available time for 5 years or more.
  • Enable remote application, AES security coprocessor.
  • Unique power management pattern
  • Ultra wide range transmission power: 4Db to -40Db.
  • Stable performance and controllable state.
  • All the interface completely can be communicated and programmed. Developers do not need to rely on the SDK for development. The requirement of hardware interface can be customized (achieved a certain number).
  • All the parameters can be configured (UUID, Major, Minor, Measured Power, TX Power, etc.).
  • Encrypted Parameter: A password is needed when access to configure.
  • Provide IOS and Android SDK.
  • Apple iBeacon certified.
  • Support 'Sleep' and 'Wake-up'.

iBeacon Parameter Default Setting

  • UUID: EBEFD08370A247C89837E7B5634DF524
  • Major and minor identifier: 0x0001, 0x0001
  • Default pairing password: 0x666666
  • Power Value: 0xCB
  • Broadcast Interval: 0x0A
  • It can be rang when starting or wake-up
  • The default mode is sleeping

 

Working Mode Detail

Working Mode Detail
There are 3 types working mode of Beacons, the first is sleeping mode, the second is connectable mode, and the third is non-connectable mode.

Sleeping Mode
Beacon default stays as sleep mode, and this model waits for being waken-up.

Connectable Mode
Beacons can only be connected in this mode, which needs to be triggered by tapping it, and it will last for 45 seconds. It means this Beacon can be connected in 45 seconds after being triggered, and Beacon will restore to sleeping mode or non-connectable mode if it is not connected in 45 seconds.

Non-Connectable Mode
Beacons can broadcast its data properly in the non-connectable mode. Beacon will begin to work normally when configured to this mode and it cannot be connected.
If want to connect it again, you must tap it 5 times, and then it will turn to connectable mode, and it must be connected within 45 seconds. Once timeout, it will restore to non-connectable mode.

 

 

What is Beacons?

Beacons are small, low-powered transmitters that communicate with smart...

Explore

How beacons work?

A preprogrammed signal is emitted from one beacon – let's call it Device...

Explore

Use of Beacons

By leveraging a smartphone user's precise location within a store...

Explore

Smart Beacons

bfonics smart beacons help you target the best location based contents to mobile solutions

Bfonics Smart Beacons

Our beacons help you target the best location based contents to mobile solutions.
Place bfonics Smart Beacons anywhere to deliver personalized messages to target customers via their mobile devices.

Product Details
iBeacon can work as an independent system, and lithium batteries supply power for these models. It has 3 different working modes, sleep mode, connectable mode and non-connectable mode. It makes the best use of the battery power. For example, it can standby over 5(CR2032) or 16(CR2450) years when work in sleeping mode, much longer than the life of the battery. For developers, we provide the Android and IOS SDK, and all the interface developed completely by us, all of the parameters can be reconfigured, including Proximity UUID, Major, Minor and Power. In order to meet different customers' needs, interval rate can also be configured, which ranges from 100 ms to 10 s. Besides, hardware TX power can be configured, and configurable range is 4 dBm to -40 dBm. Low cost customizing housing would be provided to potential customers.

 

Beacon Hardware Specifications:

Features

  • 3 working modes: Sleeping, Connectable, and Non-connectable. The modes can be switched freely.
  • Built-in Beacon firmware. Compatible with BLE 4.0.
  • Built-in a coin battery (CR2032 or CR2450). Accurate digital RSSI. Excellent link budget (up to 97 dB).
  • High performance and low power, an available time for 5 years or more.
  • Enable remote application, AES security coprocessor.
  • Unique power management pattern
  • Ultra wide range transmission power: 4Db to -40Db.
  • Stable performance and controllable state.
  • All the interface completely can be communicated and programmed. Developers do not need to rely on the SDK for development. The requirement of hardware interface can be customized (achieved a certain number).
  • All the parameters can be configured (UUID, Major, Minor, Measured Power, TX Power, etc.).
  • Encrypted Parameter: A password is needed when access to configure.
  • Provide IOS and Android SDK.
  • Apple iBeacon certified.
  • Support 'Sleep' and 'Wake-up'.

iBeacon Parameter Default Setting

  • UUID: EBEFD08370A247C89837E7B5634DF524
  • Major and minor identifier: 0x0001, 0x0001
  • Default pairing password: 0x666666
  • Power Value: 0xCB
  • Broadcast Interval: 0x0A
  • It can be rang when starting or wake-up
  • The default mode is sleeping

 

Working Mode Detail

Working Mode Detail
There are 3 types working mode of Beacons, the first is sleeping mode, the second is connectable mode, and the third is non-connectable mode.

Sleeping Mode
Beacon default stays as sleep mode, and this model waits for being waken-up.

Connectable Mode
Beacons can only be connected in this mode, which needs to be triggered by tapping it, and it will last for 45 seconds. It means this Beacon can be connected in 45 seconds after being triggered, and Beacon will restore to sleeping mode or non-connectable mode if it is not connected in 45 seconds.

Non-Connectable Mode
Beacons can broadcast its data properly in the non-connectable mode. Beacon will begin to work normally when configured to this mode and it cannot be connected.
If want to connect it again, you must tap it 5 times, and then it will turn to connectable mode, and it must be connected within 45 seconds. Once timeout, it will restore to non-connectable mode.

 

 

What is Beacons?

Beacons are small, low-powered transmitters that communicate with smart...

Explore

How beacons work?

A preprogrammed signal is emitted from one beacon – let's call it Device...

Explore

Use of Beacons

By leveraging a smartphone user's precise location within a store...

Explore